|
In this tutorial I will
show you how to enhance an image by giving it a beveled edge. First you
will need to save the image that I have shown here. Left
click then right click to save to your image file. Open the
image up in
your paint shop pro, or use an image of your choice.
Step 2:
Select the Color
Picker Tool. In
my case I used the color blue on the flag. Once you have selected
the color go to the Airbrush Tool and set, settings to, Round Size 32,
Hardness 0, Opacity 100, Step 25, Density 25. Now that you have
selected a color and
set the airbrush, spray the outer edge of the
image. Make sure you stay on the white of the image. Do not
spray the flag its self.
Step 3:
Select the Magic Wand. Set the Wand Tool to RGB,
Tolerance
60 now
click the blue color on the image. This will bring up lines
that look like marching ants while the ants are still moving, click
the Outer Bevel Tool this can be found under Effects. Set the
Bevel Tool to, Preset Metallic, Smoother
10, Depth 5, Ambience 0, Shininess 80, Intensity
25, Elevation 80. Now that you have selected the settings
click apply. Next click
on the color block and select the color black. This will give
the image depth.
Step 4:
To give the
image a more subtle look, click the Invert Tool, then click
the Light Effects. Set settings to Flood, Color Light
Gold, Intensity 50, leave all other
settings as they are.
Yes
sir ree you did it! Congratulations.
Tip: There
are numerous effects that you can get out of using different
settings. So play around with them you will be pleasantly
surprised
Copyrights
© 1999-2002
all
rights reserved
|